S1 Lifer Visor Helmet – Gen 2 – Gold Gloss Glitter W/ Clear Visor

Please be advised that extra sizing  liners are not included. Comes in size specified. Please use sizing chart to determine your size.

This is S1 Lifer Helmet W/ Visor Gen 2. This is the second edition of this product and has been completely redesigned from the original version. Each helmet will come with a carrying bag, mounting hardware, a micro fiber cloth, 4 rubber safety screw covers, 1 clear Visor and three top pads in varying thickness’s to affect how deep or shallow you want the helmet to sit on your head.

S1 Lifer Helmet w/ Visor Specs

Helmet Certifications:

• ASTM 1492 Certified for Multiple Low Force Impacts

• CPSC 1203 Certified for Single High Impacts

• CE EN 1078 Certified (European Impact Certification)

• AUS/NZS 2063:2008 Certified (Australian/New Zealand Impact Certification)

Visor Specs:

• High Impact Polycarbonate to Prevent Shattering on Impact

• Optically Correct Lens

• Anti-Fog Coating on inside of Visor to help prevent fogging

• Anti-Scratch Coating on the Outside of the Visor to help prevent minor scratches and nicks

• Patented “Cover Catcher” to allow for Multiple Helmet Covers to be worn with easy on off

• In Mold Mounting Hardware so that the Visor can be removed and replaced if needed

• Rubber Safety Screw Covers

 Patent # 10,349,698

 

Sizing Chart:

HOW TO MEASURE YOUR HEAD

 Measuring your head is very helpful to figure out what size Lifer Helmet you will need. It is easiest to do this with a soft measuring tape but if you do not have one you can use a string or a cell phone charging cable and then measure that against a ruler or hard measuring tape. You need to measure your heads circumference and will want to wrap the measuring tape starting in the middle of your forehead and just above your eye brows, then around your head above your ears and back around your head to the middle of your forehead where you started. Put simply you want to measure your head where your hat would normally sit or where you would imagine the helmet to fit on your head just above your eye brows. Once you get your measurement compare it to the sizing charts on the individual Lifer Helmet product pages to see which Lifer will fit you.

If your head measures 18.5 – 20.5″ check out the S1 Mini Lifer Helmet.

If your head measures 20.5″ – 23.5″ check out the S1 Lifer Helmet

If your head measures 23.” – 25.5″ check out the S1 Mega Lifer Helmet.

And if you are ordering a helmet for someone as a gift it is always a good idea to order a FIT ALL KIT to help the helmet fit perfectly. The Fit All Kit comes with 7 different sizing liners of varying thickness.

HOW TO PICK A HELMET

 The Lifer helmet is available in 3 different shell sizes to accommodate different size heads.

Measure your head …

If it measures 18″ – 20.25″ get an S1 Mini Lifer Helmet

If it measures 20.5″- 23.25″ get an S1 Lifer Helmet

If it measures 23.5″ – 24.5″ get an S1 Mega Lifer Helmet

Fun fact: Most kids ages 6 and under will fit into the S1 Mini Lifer Helmet. And 80% of people ages 7 and up fit into an S1 Lifer Helmet.

If you are buying a helmet for someone and you can’t measure their head – follow this general rule of thumb. Ages 6 and under order an S1 Mini Lifer Helmet (and buy a Fit All Kit so they can fit it perfectly) . Ages 7 and up order an S1 Lifer Helmet (and buy a Fit All Kit so they can fit the helmet perfectly).